Power Over LAN Midspan -1 port
MODEL- AXIS-0226-004 VENDOR- AXIS COMMUNICATIONSFEATURES- POE 1-port Midspan Note: The PoE AF Active Splitter is IEEE 802.3af compliant and can be used with the PoL Midspan or a PoE-enabled switch. If you are looking for a simpler and quicker way to install and relocate your network surveillance cameras -- without the services of an electrician - you need look no further than Power over LAN Midspans and Active Splitters from Axis. By utilizing the wires that normally go unused in standard Cat 5 network cables, Power over LAN Midspan and Active Splitter products feed power directly to Axis network video products over distances of up to 328 feet. What is more, by connecting LAN Midspans to uninterrupted power supplies devices, your network surveillance system will even continue to operate in the event of a power failure - making it the perfect solution for powering mission-critical systems. The active splitters enable Axis network video products that lack built-in support for Power over Ethernet to receive both power and data from a network connection. -- SPECIFICATIONs ----------------------------------FUNCTION - Deploying Power over LAN in conjunction with a central UPS distributes back-up power and ensures uninterrupted operation of network surveillance cameras during electrical power failures.DATA RATE - 10/100 MbpsCONNECTORS - (1) shielded RJ-45 Data connector (1) shielded RJ-45 output connector for the combined data and power, TIA/EIA 568 Category 5.SCALABILITY - Multiple Midspans can be mounted in a wiring cabinet to support additional terminals, resulting in a simple, cost effective method for expanding the network, as requirements evolve.WIRING - Midspans directly transfer data transmissions originating from Ethernet terminals over pairs 1/2 and 3/6. It acts as a normal patch panel for Ethernet connections, ensuring continuous and reliable performance. Power is provided only over unused Ethernet pairs 4/5 and 7/8.REMOTE POWER - Powers network video products up to 100m (328 ft) by utilizing existing Ethernet or fast Ethernet (category 5 unshielded or shielded twisted-pair cabling) for power transfer.POWER OVER LAN OUTPUT- Pin assignment and polarity: 4/5 (RTN.), 7/8 (-V) Output power voltage : -48 V User port power : 15.4 W minimum Aggregate power : 1 port Midspan: 23 WINSTALLATION & MANAGEMENT- Plug-and-play installation. Midspans automatically detect all Power over LAN Ethernet terminals and supply inline power. Local LED management display.AUTO-SENSING ALGORITHM- Standard IEEE802.3af auto-sensing algorithm, backward compatibility to the pre-standard algorithm. This mechanism automatically detects power-ready terminals and supplies inline power. The per-port ensures continuous proper operation of devices (e.g. Network Interface Cards (NICs) that do no expect power on their Ethernet connection. DISPLAY & INDICATORS- All port int
SKU: DHAXIS0226004
