GIGABIT PCI-EXPRESS NETWORK ADAPTER SNMP VLAN FLOW CONTROL
The DGE-560T PCI Express Gigabit Network Adapter from D-Link is a high performance adapter designed for the high-speed PCI Express Bus Architecture. The PCI Express Network Adapter from D-Link offers increased bandwidth, reliability, and more functionality than standard PCI network cards. It is specifically designed to allow throughput at rates up to 2Gbps, thus eliminating the bottleneck that exists with current 32 and 64 bit PCI bus architectures. With support for advanced features such as: 802.3x flow control, SNMP for network monitoring and management, and Jumbo Frames, interoperability with your current networking equipment, and network feature sets will not be an issue. The card also features on-board screening of 802.1Q VLAN Tagged Ethernet frames, allowing you to assign multiple subnets to each server and isolate devices within each VLAN from the rest of the network for better traffic control and security. It also supports 802.1P Priority Tagging to allow you to prioritize traffic. In addition, the DGE-560T supports 802.3ad Link Aggregation. This feature provides a means to increase bandwidth to workstations and servers by Trunking multiple cards together forming one large bandwidth pipe. In today’s overpopulated and bandwidth starved networks, 802.3ad Link Aggregation can dramatically improve performance to your over burdened LAN servers. When using multiple cards, the DGE-560T has the ability to provide fail over protection in the event that one network card malfunctions. In this situation, your server or workstation traffic is simply passed over the remaining functional network card connections, guaranteeing safe, uninterrupted, transmission of data, while a replacement card can be installed. Best of all, with the DGE-560T’s Hot-Plug support, a replacement card can be installed without ever having to power down your system. DGE-560T also supports TCP, UDP, and IP Checksum Calculation as well as TCP Segmentation to improve overall system performance by shifting CPU intensive task away from your host CPU, and onto the DGE-560T card itself. The DGE-560T includes many additional advanced features such as Advanced Power Management and Wake-on-LAN support. It also supports remote network boot using both PXE and RPL, allowing the network administrator to boot the PC from anywhere on the network.The DGE-560T supports all major Operating Systems including Windows 2000, XP, and 2003, guaranteeing compatibility with existing server and workstation environments. The card also features a cable diagnostic utility which will automatically detect when you have a bad cable, making your troubleshooting task much easier. With advanced features, high-performance architecture, and reliability, the D-Link DGE-560T is the perfect companion for any network that requires a high-performance Gigabit network card at an affordable price. Primary InformationNetworking Type : Network adapter Form Factor : Plug-in card Networking Interface : PCI Express x1 Networking / Ports Qty : 1 port Data Transfer Rate : 1 Gbps Data Link Protocol : Ethernet; Fast Ethernet; Gigabit Ethernet Transport Protocol : TCP/IP; UDP/IP Connectivity Technology : Wired Remote Management Protocol : SNMP 1 Networking / Compliant Standards : IEEE 802.3, IEEE 802.3U, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x Cabling Type : Ethernet 10BASE-T; Ethernet 1000Base-T; Ethernet 100Base-TX Features : Flow control, full duplex capability, auto-sensing per device, ACPI support, auto-negotiation, VLAN support, wake on LAN (WOL), manageable Dimensions&MiscellaneousDepth : 3.4 Inch Height : 2.2 Inch ExpansionInterfaces & Connections : Interfaces:1 x network - Ethernet 10Base-T/100Base-TX - RJ-45;Compatible Slots:1 x PCI Express x1 Service&SupportService & Support Type : 2 years warranty UNSPSC CodeUNSPSC Code : 43201404
SKU: SY1090844
Out of stock
Return to Digital Universe home page
